I have
received from Bailey a very comprehensive explanation as to why the table on
the Unicorn 3 Cadiz won’t fit under the N/S bunk as it does on the Unicorn 4
and sadly has to stay in the wardrobe :-
Good Afternoon Mr Broadhead
Sent from my Xperia XZ Premium on O2
Hello,
Could you tell me if the Unicorn 4 Cadiz under bunk table holding brackets would fit a a Unicorn 3 Cadiz table so I could move it from the wardrobe to store it under the nearside bunk as in the U4
Thank You,
Ian Broadhead
Sent from my Xperia XZ Premium on O2
Please see the information below received from our engineering team.
Kind Regards
Jo Barrington
Customer Services Co-ordinator
Customer Services Co-ordinator
|
Main:
|
0117 966 5967
|
|
Email:
|
Sent: 12 February 2018 15:30
To: Customer Services <customerservices@baileyofbristol.co.uk>
Subject: RE: U4 Table Storage Brackets
To: Customer Services <customerservices@baileyofbristol.co.uk>
Subject: RE: U4 Table Storage Brackets
The table is exactly the same size on UN3 Cadiz as it is on UN4. The restricting part is the construction and size of the rear N/S
bunk on UN3.
The distance between the support and bunk end on the Unicorn 4 is sufficient to allow the table to fit in between (see yellow arrow
on image below). I don’t believe this is the case on Unicorn 3.
Secondly, the distance between the two fixing faces of the bracket is 523mm (see image below). The internal measurement of the bunk
frame on Unicorn 3 is 451mm, therefore it would not fit in this space.
|
Product Development Engineer
|
|
|
|
|
|
|
# ref: 15694
From: Ian Broadhead []
Sent: 10 February 2018 17:44
To: Customer Services <customerservices@baileyofbristol.co.uk>
Subject: FW: U4 Table Storage Brackets
Sent: 10 February 2018 17:44
To: Customer Services <customerservices@baileyofbristol.co.uk>
Subject: FW: U4 Table Storage Brackets
ref: 15694
From: Ian Broadhead ]
Sent: 05 February 2018 13:50
To: Parts Services <parts@baileyofbristol.co.uk>
Subject: U4 Table Storage Brackets
Sent: 05 February 2018 13:50
To: Parts Services <parts@baileyofbristol.co.uk>
Subject: U4 Table Storage Brackets
Could you tell me if the Unicorn 4 Cadiz under bunk table holding brackets would fit a a Unicorn 3 Cadiz table so I could move it from the wardrobe to store it under the nearside bunk as in the U4
Thank You,
Ian Broadhead
Sent from my Xperia XZ Premium on O2
This email was scanned by Bitdefender
No comments:
Post a Comment